View MT18KDF1G72PZ_7688831.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1.35v ddr3l sdram rdimm MT18KDF1G72PZ C 8gb features ? ddr3l functionality and operations supported as per the component data sheet ? 240-pin, registered dual in-line memory module (rdimm) ? fast data transfer rates: pc3-12800, pc3-10600, pc3-8500, or pc3-6400 ? 8gb (1 gig x 72) ? v dd = 1.35v (1.283C1.45v) ? v dd = 1.5v (1.425C1.575v) ? backward compatible to v dd = 1.5v 0.075v ? v ddspd = 3.0C3.6v ? supports ecc error detection and correction ? nominal and dynamic on-die termination (odt) for data and strobe signals ? single-rank ? on-board i 2 c temperature sensor with integrated serial presence-detect (spd) eeprom ? 8 internal device banks ? fixed burst chop (bc) of 4 and burst length (bl) of 8 via the mode register set (mrs) ? selectable bc4 or bl8 on-the-fly (otf) ? gold edge contacts ? halogen-free ? fly-by topology ? terminated control, command, and address bus figure 1: 240-pin rdimm (mo-269 r/c m1) module height: 18.75mm (0.738in) options marking ? operating temperature C commercial (0c t a +70c) none ? package C 240-pin dimm (halogen-free) z ? frequency/cas latency C 1.25ns @ cl = 11 (ddr3-1600) -1g6 C 1.5ns @ cl = 9 (ddr3-1333) -1g4 C 1.87ns @ cl = 7 (ddr3-1066) -1g1 table 1: key timing parameters speed grade industry nomenclature data rate (mt/s) t rcd (ns) t rp (ns) t rc (ns) cl = 11 cl = 10 cl = 9 cl = 8 cl = 7 cl = 6 cl = 5 -1g6 pc3-12800 1600 1333 1333 1066 1066 800 667 13.125 13.125 48.125 -1g4 pc3-10600 C 1333 1333 1066 1066 800 667 13.125 13.125 49.125 -1g1 pc3-8500 C C C 1066 1066 800 667 13.125 13.125 50.625 -1g0 pc3-8500 C C C 1066 C 800 667 15 15 52.5 -80b pc3-6400 C C C C C 800 667 15 15 52.5 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm features pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 1 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved. products and specifications discussed herein are subject to change by micron without notice.
table 2: addressing parameter 8gb refresh count 8k row address 64k a[15:0] device bank address 8 ba[2:0] device configuration 4gb (1 gig x 4) column address 2k a[11, 9:0] module rank address 1 s0# table 3: part numbers and timing parameters C 8gb modules base device: mt41k1g4, 1 4gb ddr3l sdram part number 2 module density configuration module bandwidth memory clock/ data rate clock cycles (cl- t rcd- t rp) MT18KDF1G72PZ-1g6__ 8gb 1 gig x 72 12.8 gb/s 1.25ns/1600 mt/s 11-11-11 MT18KDF1G72PZ-1g4__ 8gb 1 gig x 72 10.6 gb/s 1.5ns/1333 mt/s 9-9-9 MT18KDF1G72PZ-1g1__ 8gb 1 gig x 72 8.5 gb/s 1.87ns/1066 mt/s 7-7-7 notes: 1. the data sheet for the base device can be found on microns web site. 2. all part numbers end with a two-place code (not shown) that designates component and pcb revisions. consult factory for current revision codes. example: MT18KDF1G72PZ-1g4 e1. 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm features pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 2 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
pin assignments table 4: pin assignments 240-pin ddr3 rdimm front 240-pin ddr3 rdimm back pin symbol pin symbol pin symbol pin symbol pin symbol pin symbol pin symbol pin symbol 1 v refdq 31 dq25 61 a2 91 dq41 121 v ss 151 v ss 181 a1 211 v ss 2 v ss 32 v ss 62 v dd 92 v ss 122 dq4 152 dqs12 182 v dd 212 dqs14 3 dq0 33 dqs3# 63 nf 93 dqs5# 123 dq5 153 dqs12# 183 v dd 213 dqs14# 4 dq1 34 dqs3 64 nf 94 dqs5 124 v ss 154 v ss 184 ck0 214 v ss 5 v ss 35 v ss 65 v dd 95 v ss 125 dqs9 155 dq30 185 ck0# 215 dq46 6 dqs0# 36 dq26 66 v dd 96 dq42 126 dqs9# 156 dq31 186 v dd 216 dq47 7 dqs0 37 dq27 67 v refca 97 dq43 127 v ss 157 v ss 187 event# 217 v ss 8 v ss 38 v ss 68 par_in 98 v ss 128 dq6 158 cb4 188 a0 218 dq52 9 dq2 39 cb0 69 v dd 99 dq48 129 dq7 159 cb5 189 v dd 219 dq53 10 dq3 40 cb1 70 a10 100 dq49 130 v ss 160 v ss 190 ba1 220 v ss 11 v ss 41 v ss 71 ba0 101 v ss 131 dq12 161 dqs17 191 v dd 221 dqs15 12 dq8 42 dqs8# 72 v dd 102 dqs6# 132 dq13 162 dqs17# 192 ras# 222 dqs15# 13 dq9 43 dqs8 73 we# 103 dqs6 133 v ss 163 v ss 193 s0# 223 v ss 14 v ss 44 v ss 74 cas# 104 v ss 134 dqs10 164 cb6 194 v dd 224 dq54 15 dqs1# 45 cb2 75 v dd 105 dq50 135 dqs10# 165 cb7 195 odt0 225 dq55 16 dqs1 46 cb3 76 nc 106 dq51 136 v ss 166 v ss 196 a13 226 v ss 17 v ss 47 v ss 77 nc 107 v ss 137 dq14 167 nu 197 v dd 227 dq60 18 dq10 48 v tt 78 v dd 108 dq56 138 dq15 168 reset# 198 nc 228 dq61 19 dq11 49 v tt 79 nc 109 dq57 139 v ss 169 nc 199 v ss 229 v ss 20 v ss 50 cke0 80 v ss 110 v ss 140 dq20 170 v dd 200 dq36 230 dqs16 21 dq16 51 v dd 81 dq32 111 dqs7# 141 dq21 171 a15 201 dq37 231 dqs16# 22 dq17 52 ba2 82 dq33 112 dqs7 142 v ss 172 a14 202 v ss 232 v ss 23 v ss 53 err_out# 83 v ss 113 v ss 143 dqs11 173 v dd 203 dqs13 233 dq62 24 dqs2# 54 v dd 84 dqs4# 114 dq58 144 dqs11# 174 a12 204 dqs13# 234 dq63 25 dqs2 55 a11 85 dqs4 115 dq59 145 v ss 175 a9 205 v ss 235 v ss 26 v ss 56 a7 86 v ss 116 v ss 146 dq22 176 v dd 206 dq38 236 v ddspd 27 dq18 57 v dd 87 dq34 117 sa0 147 dq23# 177 a8 207 dq39 237 sa1 28 dq19 58 a5 88 dq35 118 scl 148 v ss 178 a6 208 v ss 238 sda 29 v ss 59 a4 89 v ss 119 sa2 149 dq28 179 v dd 209 dq44 239 v ss 30 dq24 60 v dd 90 dq40 120 v tt 150 dq29 180 a3 210 dq45 240 v tt 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm pin assignments pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 3 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
pin descriptions the pin description table below is a comprehensive list of all possible pins for all ddr3 modules. all pins listed may not be supported on this module. see pin assignments for information specific to this module. table 5: pin descriptions symbol type description ax input address inputs: provide the row address for active commands, and the column ad- dress and auto precharge bit (a10) for read/write commands, to select one location out of the memory array in the respective bank. a10 sampled during a precharge command determines whether the precharge applies to one bank (a10 low, bank selected by bax) or all banks (a10 high). the address inputs also provide the op-code during a load mode command. see the pin assignments table for density-specific ad- dressing information. bax input bank address inputs: define the device bank to which an active, read, write, or precharge command is being applied. ba define which mode register (mr0, mr1, mr2, or mr3) is loaded during the load mode command. ckx, ckx# input clock: differential clock inputs. all control, command, and address input signals are sampled on the crossing of the positive edge of ck and the negative edge of ck#. ckex input clock enable: enables (registered high) and disables (registered low) internal circui- try and clocks on the dram. dmx input data mask (x8 devices only): dm is an input mask signal for write data. input data is masked when dm is sampled high, along with that input data, during a write ac- cess. although dm pins are input-only, dm loading is designed to match that of the dq and dqs pins. odtx input on-die termination: enables (registered high) and disables (registered low) termi- nation resistance internal to the ddr3 sdram. when enabled in normal operation, odt is only applied to the following pins: dq, dqs, dqs#, dm, and cb. the odt input will be ignored if disabled via the load mode command. par_in input parity input: parity bit for ax, ras#, cas#, and we#. ras#, cas#, we# input command inputs: ras#, cas#, and we# (along with s#) define the command being entered. reset# input (lvcmos) reset: reset# is an active low asychronous input that is connected to each dram and the registering clock driver. after reset# goes high, the dram must be reinitial- ized as though a normal power-up was executed. sx# input chip select: enables (registered low) and disables (registered high) the command decoder. sax input serial address inputs: used to configure the temperature sensor/spd eeprom ad- dress range on the i 2 c bus. scl input serial clock for temperature sensor/spd eeprom: used to synchronize communi- cation to and from the temperature sensor/spd eeprom on the i 2 c bus. cbx i/o check bits: used for system error detection and correction. dqx i/o data input/output: bidirectional data bus. dqsx, dqsx# i/o data strobe: differential data strobes. output with read data; edge-aligned with read data; input with write data; center-aligned with write data. 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm pin descriptions pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 4 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
table 5: pin descriptions (continued) symbol type description sda i/o serial data: used to transfer addresses and data into and out of the temperature sen- sor/spd eeprom on the i 2 c bus. tdqsx, tdqsx# output redundant data strobe (x8 devices only): tdqs is enabled/disabled via the load mode command to the extended mode register (emr). when tdqs is enabled, dm is disabled and tdqs and tdqs# provide termination resistance; otherwise, tdqs# are no function. err_out# output (open drain) parity error output: parity error found on the command and address bus. event# output (open drain) temperature event: the event# pin is asserted by the temperature sensor when crit- ical temperature thresholds have been exceeded. v dd supply power supply: 1.35v (1.283C1.45v) backward-compatible to 1.5v (1.425C1.575v). the component v dd and v ddq are connected to the module v dd . v ddspd supply temperature sensor/spd eeprom power supply: 3.0C3.6v. v refca supply reference voltage: control, command, and address v dd /2. v refdq supply reference voltage: dq, dm v dd /2. v ss supply ground. v tt supply termination voltage: used for control, command, and address v dd /2. nc C no connect: these pins are not connected on the module. nf C no function: these pins are connected within the module, but provide no functional- ity. 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm pin descriptions pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 5 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
dq map table 6: component-to-module dq map component reference number component dq module dq module pin number component reference number component dq module dq module pin number u1 0 0 3 u2 0 8 12 1 1 4 1 9 13 2 2 9 2 10 18 3 3 10 3 11 19 u3 0 16 21 u4 0 24 30 1 17 22 1 25 31 2 18 27 2 26 36 3 19 28 3 27 37 u5 0 cb0 39 u7 0 32 81 1 cb1 40 1 33 82 2 cb2 45 2 34 87 3 cb3 46 3 35 88 u8 0 40 90 u9 0 48 99 1 41 91 1 49 100 2 42 96 2 50 105 3 43 97 3 51 106 u10 0 56 108 u11 0 60 227 1 57 109 1 61 228 2 58 114 2 62 233 3 59 115 3 63 234 u12 0 52 218 u13 0 44 209 1 53 219 1 45 210 2 54 224 2 46 215 3 55 225 3 47 216 u14 0 36 200 u16 0 cb4 158 1 37 201 1 cb5 159 2 38 206 2 cb6 164 3 39 207 3 cb7 165 u17 0 28 149 u18 0 20 140 1 29 150 1 21 141 2 30 155 2 22 146 3 31 156 3 23 147 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm dq map pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 6 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
table 6: component-to-module dq map (continued) component reference number component dq module dq module pin number component reference number component dq module dq module pin number u19 0 12 131 u20 0 4 122 1 13 132 1 5 123 2 14 137 2 6 128 3 15 138 3 7 129 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm dq map pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 7 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
functional block diagram figure 2: functional block diagram v refca v ss ddr3 sdram ddr3 sdram v dd control, command and address termination v ddspd spd eeprom/ temperature sensor v tt ddr3 sdram ddr3 sdram v refdq dm cs# dqs dqs# dq dq dq dq dq0 dq1 dq2 dq3 u1 dq dq dq dq dq4 dq5 dq6 dq7 u20 dq dq dq dq dq8 dq9 dq10 dq11 u2 dq dq dq dq dq12 dq13 dq14 dq15 u19 dq dq dq dq dq16 dq17 dq18 dq19 u3 dq dq dq dq dq20 dq21 dq22 dq23 u18 dq dq dq dq dq24 dq25 dq26 dq27 u4 dq dq dq dq dq28 dq29 dq30 dq31 u17 dq dq dq dq dq32 dq33 dq34 dq35 u7 dq dq dq dq dq36 dq37 dq38 dq39 u14 dq dq dq dq dq40 dq41 dq42 dq43 u8 dq dq dq dq dq44 dq45 dq46 dq47 u13 dq dq dq dq dq48 dq49 dq50 dq51 u9 dq dq dq dq dq52 dq53 dq54 dq55 u12 dq dq dq dq dq56 dq57 dq58 dq59 u10 dq dq dq dq dq60 dq61 dq62 dq63 u11 dq dq dq dq cb4 cb5 cb6 cb7 u16 dq dq dq dq cb0 cb1 cb2 cb3 u5 v ss rs0# dqs0 dqs0# dqs1 dqs1# dqs2 dqs2# dqs3 dqs3# dqs4 dqs4# dqs5 dqs5# dqs6 dqs6# dqs7 dqs7# dqs8 dqs8# dqs9 dqs9# dqs10 dqs10# dqs11 dqs11# dqs12 dqs12# dqs13 dqs13# dqs14 dqs14# dqs15 dqs15# dqs16 dqs16# dqs17 dqs17# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# dm cs# dqs dqs# zq v ss zq zq zq zq zq zq zq zq zq zq zq zq zq zq zq zq zq r e g i s t e r a n d p l l s0# ba[2:0] a[15:0] ras# cas# we# cke0 odt0 par_in reset# ck0 ck0# rs0#: ddr3 sdram rba[2:0]: ddr3 sdram ra[15:0]: ddr3 sdram rras#: ddr3 sdram rcas#: ddr3 sdram rwe#: ddr3 sdram rcke0: ddr3 sdram rodt0: ddr3 sdram err_out# ck ck# ddr3 sdram u6 v ss v ss v ss v ss v ss v ss v ss v ss v ss v ss v ss v ss v ss v ss v ss v ss v ss rs#, rcke, ra[15:0], rras#, rcas#, rwe#, rodt, rba[2:0] ck ck# command, control, address, and clock line terminations: ddr3 sdram v tt ddr3 sdram v dd u15 a0 spd eeprom/ temperature sensor a1 a2 sa0 sa1 sda scl evt event# ddr3 sdram sa2 note: 1. the zq ball on each ddr3 component is connected to an external 240 1% resistor that is tied to ground. it is used for the calibration of the components odt and output driver. 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm functional block diagram pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 8 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
general description ddr3 sdram modules are high-speed, cmos dynamic random access memory mod- ules that use internally configured 8-bank ddr3 sdram devices. ddr3 sdram mod- ules use ddr architecture to achieve high-speed operation. ddr3 architecture is essen- tially an 8 n -prefetch architecture with an interface designed to transfer two data words per clock cycle at the i/o pins. a single read or write access for the ddr3 sdram mod- ule effectively consists of a single 8 n -bit-wide, one-clock-cycle data transfer at the inter- nal dram core and eight corresponding n -bit-wide, one-half-clock-cycle data transfers at the i/o pins. ddr3 modules use two sets of differential signals: dqs, dqs# to capture data and ck and ck# to capture commands, addresses, and control signals. differential clocks and data strobes ensure exceptional noise immunity for these signals and provide precise crossing points to capture input signals. fly-by topology ddr3 modules use faster clock speeds than earlier ddr technologies, making signal quality more important than ever. for improved signal quality, the clock, control, com- mand, and address buses have been routed in a fly-by topology, where each clock, con- trol, command, and address pin on each dram is connected to a single trace and ter- minated (rather than a tree structure, where the termination is off the module near the connector). inherent to fly-by topology, the timing skew between the clock and dqs sig- nals can be easily accounted for by using the write-leveling feature of ddr3. registering clock driver operation registered ddr3 sdram modules use a registering clock driver device consisting of a register and a phase-lock loop (pll). the device complies with the jedec standard "definition of the sste32882 registering clock driver with parity and quad chip se- lects for ddr3 rdimm applications." the register section of the registering clock driver latches command and address input signals on the rising clock edge. the pll section of the registering clock driver receives and redrives the differential clock signals (ck, ck#) to the ddr3 sdram devices. the register(s) and pll reduce clock, control, command, and address signals loading by iso- lating dram from the system controller. parity operations the registering clock driver includes an even parity function for checking parity. the memory controller accepts a parity bit at the par_in input and compares it with the data received on a[15:0], ba[2:0], ras#, cas#, and we#. valid parity is defined as an even number of ones (1s) across the address and command inputs (a[15:0], ba[2:0], ras#, cas#, and we#) combined with par_in. parity errors are flagged on err_out#. address and command parity is checked during all dram operations and during con- trol word write operations to the registering clock driver. for sdram operations, the address is still propagated to the sdram even when there is a parity error. when writ- ing to the internal control words of the registering clock driver, the write will be ignored if parity is not valid. for this reason, systems must connect the par_in pins on the dimm and provide correct parity when writing to the registering clock driver control word configuration registers. 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm general description pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 9 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
temperature sensor with serial presence-detect eeprom thermal sensor operations the temperature from the integrated thermal sensor is monitored and converts into a digital word via the i 2 c bus. system designers can use the user-programmable registers to create a custom temperature-sensing solution based on system requirements. pro- gramming and configuration details comply with jedec standard no. 21-c page 4.7-1, "definition of the tse2002av, serial presence detect with temperature sensor." serial presence-detect eeprom operation ddr3 sdram modules incorporate serial presence-detect. the spd data is stored in a 256-byte eeprom. the first 128 bytes are programmed by micron to comply with je- dec standard jc-45, "appendix x: serial presence detect (spd) for ddr3 sdram mod- ules." these bytes identify module-specific timing parameters, configuration informa- tion, and physical attributes. the remaining 128 bytes of storage are available for use by the customer. system read/write operations between the master (system logic) and the slave eeprom device occur via a standard i 2 c bus using the dimms scl (clock) sda (data), and sa (address) pins. write protect (wp) is connected to v ss , permanently disabling hardware write protection. for further information refer to micron technical note tn-04-42, "memory module serial presence-detect." 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm temperature sensor with serial presence-detect eeprom pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 10 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
electrical specifications stresses greater than those listed may cause permanent damage to the module. this is a stress rating only, and functional operation of the module at these or any other condi- tions outside those indicated in each device's data sheet is not implied. exposure to ab- solute maximum rating conditions for extended periods may adversely affect reliability. table 7: absolute maximum ratings symbol parameter min max units v dd v dd supply voltage relative to v ss C0.4 1.975 v v in , v out voltage on any pin relative to v ss C0.4 1.975 v table 8: operating conditions symbol parameter min nom max units notes v dd v dd supply voltage 1.283 1.35 1.45 v 1.425 1.5 1.575 v 1 v refca(dc) input reference voltage command/ address bus 0.49 v dd 0.5 v dd 0.51 v dd v v refdq(dc) i/o reference voltage dq bus 0.49 v dd 0.5 v dd 0.51 v dd v i vtt termination reference current from v tt C600 C 600 ma v tt termination reference voltage (dc) C command/address bus 0.49 v dd - 20mv 0.5 v dd 0.51 v dd + 20mv v 2 i i input leakage current; any input 0v v in v dd ; v ref input 0v v in 0.95v (all other pins not under test = 0v) address in- puts, ras#, cas#, we#, s#, cke, odt, ba, ck, ck# tbd tbd tbd a i oz output leakage current; 0v v out v dd ; dq and odt are disabled; odt is high dq, dqs, dqs# C5 0 5 a i vref v ref supply leakage current; v refdq = v dd/2 or v refca = v dd/2 (all other pins not under test = 0v) C18 0 18 a t a module ambient operating temperature 0 C 70 c 3, 4 t c ddr3 sdram component case operat- ing temperature 0 C 95 c 3, 4, 5 notes: 1. module is backward-compatible with 1.5v operation. refer to device specification for details and operation guidance. 2. v tt termination voltage in excess of the stated limit will adversely affect the command and address signals voltage margin and will reduce timing margins. 3. t a and t c are simultaneous requirements. 4. for further information, refer to technical note tn-00-08: thermal applications, 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm electrical specifications pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 11 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
available on microns web site. 5. the refresh rate is required to double when 85c < t c 95c. 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm electrical specifications pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 12 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
dram operating conditions recommended ac operating conditions are given in the ddr3 component data sheets. component specifications are available on microns web site. module speed grades cor- relate with component speed grades, as shown below. table 9: module and component speed grades ddr3 components may exceed the listed module speed grades; module may not be available in all listed speed grades module speed grade component speed grade -1g9 -107 -1g6 -125 -1g4 -15e -1g1 -187e -1g0 -187 -80c -25e -80b -25 design considerations simulations micron memory modules are designed to optimize signal integrity through carefully de- signed terminations, controlled board impedances, routing topologies, trace length matching, and decoupling. however, good signal integrity starts at the system level. micron encourages designers to simulate the signal characteristics of the system's memory bus to ensure adequate signal integrity of the entire memory system. power operating voltages are specified at the dram, not at the edge connector of the module. designers must account for any system voltage drops at anticipated power levels to en- sure the required supply voltage is maintained. 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm dram operating conditions pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 13 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
i dd specifications table 10: ddr3 i dd specifications and conditions C 8gb (die revision e) values are for the mt41k1g4 ddr3l sdram only and are computed from values specified in the 4gb (1 gig x 4) compo- nent data sheet parameter symbol 1600 1333 1066 units operating current 0: one bank activate-to-precharge i dd0 990 846 792 ma operating current 1: one bank activate-to-read-to-pre- charge i dd1 1098 1026 954 ma precharge power-down current: slow exit i dd2p0 288 288 288 ma precharge power-down current: fast exit i dd2p1 576 504 468 ma precharge quiet standby current i dd2q 486 450 396 ma precharge standby current i dd2n 504 450 432 ma precharge standby odt current i dd2nt 612 540 486 ma active power-down current i dd3p 684 630 576 ma active standby current i dd3n 684 630 576 ma burst read operating current i dd4r 2646 2340 2034 ma burst write operating current i dd4w 2124 1854 1566 ma refresh current i dd5b 2790 2664 2592 ma self refresh temperature current: max t c = 85c i dd6 360 360 360 ma self refresh temperature current (srt-enabled): max t c = 95c i dd6et 450 450 450 ma all banks interleaved read current i dd7 3960 3420 2880 ma reset current i dd8 324 324 324 ma 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm i dd specifications pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 14 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
registering clock driver specifications table 11: registering clock driver electrical characteristics sste32882 devices or equivalent parameter symbol pins min nom max units dc supply voltage v dd C 1.425 1.5 1.575 v dc reference voltage v ref C 0.49 v dd - 20mv 0.5 v dd 0.51 v dd + 20mv v dc termination voltage v tt C 0.49 v dd - 20mv 0.5 v dd 0.51 v dd + 20mv v ac high-level input voltage v ih(ac) control, command, address v ref + 175mv C v dd + 400mv v ac low-level input voltage v il(ac) control, command, address C0.4 C v ref - 175mv v dc high-level input voltage v ih(dc) control, command, address v ref + 100mv C v dd + 0.4 v dc low-level input voltage v il(dc) control, command, address C0.4 C v ref - 100mv v high-level input voltage v ih(cmos) reset#, mirror 0.65 v dd C v dd v low-level input voltage v il(cmos) reset#, mirror 0 C 0.35 v dd v differential input crosspoint voltage range v ix(ac) ck, ck#, fbin, fbin# 0.5 v dd - 175mv 0.5 v dd 0.5 v dd + 175mv v differential input voltage v id(ac) ck, ck# 350 C v dd + tbd mv high-level output current i oh err_out# C C tbd ma low-level output current i ol err_out# tbd C tbd ma note: 1. timing and switching specifications for the register listed are critical for proper opera- tion of the ddr3 sdram rdimms. these are meant to be a subset of the parameters for the specific device used on the module. 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm registering clock driver specifications pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 15 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
temperature sensor with serial presence-detect eeprom the temperature sensor continuously monitors the module's temperature and can be read back at any time over the i 2 c bus shared with the spd eeprom. refer to jedec standard no. 21-c page 4.7-1, "definition of the tse2002av, serial presence detect with temperature sensor." serial presence-detect for the latest spd data, refer to micron's spd page: www.micron.com/spd . table 12: temperature sensor with spd eeprom operating conditions parameter/condition symbol min max units supply voltage v ddspd 3.0 3.6 v supply current: v dd = 3.3v i dd C 2.0 ma input high voltage: logic 1; scl, sda v ih 1.45 v ddspd + 1 v input low voltage: logic 0; scl, sda v il C 0.55 v output low voltage: i out = 2.1ma v ol C 0.4 v input current i in C5.0 5.0 a temperature sensing range C C40 125 c temperature sensor accuracy (class b) C C1.0 1.0 c table 13: temperature sensor and eeprom serial interface timing parameter/condition symbol min max units time bus must be free before a new transition can start t buf 4.7 C s sda fall time t f 20 300 ns sda rise time t r C 1000 ns data hold time t hd:dat 200 900 ns start condition hold time t h:sta 4.0 C s clock high period t high 4.0 50 s clock low period t low 4.7 C s scl clock frequency t scl 10 100 khz data setup time t su:dat 250 C ns start condition setup time t su:sta 4.7 C s stop condition setup time t su:sto 4.0 C s 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm temperature sensor with serial presence-detect eeprom pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 16 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
event# pin the temperature sensor also adds the event# pin (open-drain). not used by the spd eeprom, event# is a temperature sensor output used to flag critical events that can be set up in the sensors configuration register. event# has three defined modes of operation: interrupt mode, compare mode, and critical temperature mode. event thresholds are programmed in the 0x01 register using a hysteresis. the alarm window provides a comparison window, with upper and lower limits set in the alarm upper boundary register and the alarm lower boundary register, respectively. when the alarm window is enabled, event# will trigger whenever the temperature is outside the min or max values set by the user. the interrupt mode enables software to reset event# after a critical temperature threshold has been detected. threshold points are set in the configuration register by the user. this mode triggers the critical temperature limit and both the min and max of the temperature window. the compare mode is similar to the interrupt mode, except event# cannot be reset by the user and returns to the logic high state only when the temperature falls below the programmed thresholds. critical temperature mode triggers event# only when the temperature has exceeded the programmed critical trip point. when the critical trip point has been reached, the temperature sensor goes into comparator mode, and the critical event# cannot be cleared through software. 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm temperature sensor with serial presence-detect eeprom pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 17 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.
module dimensions figure 3: 240-pin ddr3 rdimm 18.9 (0.744) 18.6 (0.732) pin 1 2.5 (0.098) d (2x) 2.3 (0.091) typ 5.0 (0.197) typ 123.0 (4.84) typ 1.0 (0.039) typ 0.8 (0.031) typ 0.75 (0.03) r (6x) 0.76 (0.03) r pin 120 front view 133.50 (5.256) 133.20 (5.244) 47.0 (1.85) typ 71.0 (2.79) typ 9.5 (0.374) typ back view pin 240 pin 121 1.37 (0.054) 1.17 (0.046) 4.0 (0.157) max 2.2 (0.087) typ 1.45 (0.057) typ 3.05 (0.12) typ 54.68 (2.15) typ 3.0 (0.118) 4x typ u1 u2 u3 u4 u5 u6 u7 u8 u9 u10 u11 u12 u13 u14 u15 u16 u17 u18 u19 u20 45, 2x notes: 1. all dimensions are in millimeters (inches); max/min or typical (typ) where noted. 2. the dimensional diagram is for reference only. 8000 s. federal way, p.o. box 6, boise, id 83707-0006, tel: 208-368-3900 www.micron.com/productsupport customer comment line: 800-932-4992 micron and the micron logo are trademarks of micron technology, inc. all other trademarks are the property of their respective owners. this data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein. although considered final, these specifications are subject to change, as further product development and data characterization some- times occur. 8gb (x72, ecc, sr) 240-pin 1.35v ddr3l rdimm module dimensions pdf: 09005aef84b83d18 kdf18c1gx72pz.pdf - rev. a 04/12 en 18 micron technology, inc. reserves the right to change products or specifications without notice. ? 2012 micron technology, inc. all rights reserved.

▲Up To Search▲

Price & Availability of MT18KDF1G72PZ

	To Download MT18KDF1G72PZ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .